Zonex ATEX- and IECEx-Certified, Type 4X, Hinged Cover

Catalog Number: EXE12128SS61
null
Type Rating Information
  ATEX Directive 94/9/EC:
  Sira 07ATEX3260
  Ex e IIC Gb
  Ex tb IIIC Db IP 66
  ICEEx:
  IECEx SIR 09.0100
  from Ex e IIC Gb
  Ex tb IIIC Db IP 66
  Type 4, 4X, 12; File No. E61997
  cUL C22.2 No. 94 Listed: Type 4, 4X, 12; File No. E31997
  NEMA/EEMAC Type 4, 4X, 12
  IEC 60529, IP66
Enter Additional Options
null
Enter Dimensions in Inches (Within Min and Max)
Sizes are available within mininimum and maximum dimensions only.
Enclosures with a size change will be provided with the largest standard sized gland plate
(or combination of standard sized gland plates) that will fit on the enclosure bottom.
Changes to the bottom gland plate(s) or adding gland plates in the top or sides can be
done in the "Accessories" section.
10.00 12.00
12.00 12.00
6.00 8.00
  Set Values to Defaults
Enter Manufacturing Instructions If No Drawing Available (Optional)
At least one dimension must be changed for the Manufacturing Instructions to be displayed
in this section.
null
Select to Change Material
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Change Gasket Material
Any Gland Plate selections or changes should be made in the Accessories section prior to making the Silicone Gasket selection.
The price shown after making this selection will reflect the addition of Silicone Gasket on the Gland Plates as well.
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Select a Finish
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Select Surfaces that Require Holes and Cutouts
Drawing(s) required.
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Select Tapped Holes
 
Range: 0 - 1000
 
Range: 0 - 1000
Select Grounding Provisions
Attach drawing or clarify in Manufacturing Instructions if location must be specified.
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Select Options for Mounting Terminal Blocks
Standard Mounting Method: Studs / Weldnuts only. No provisions for mounting terminals.
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Select Mounting Options
Select Floor Mounting
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Select Data Pocket Options
Select Latch Option
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Select General Accessories
Select Gland Plates
All Gland Plates will be located centered front-to-back and centered (within the usable area) along the vertical or horizontal axis.
Multiple Gland Plates on the same surface will be spaced evenly (within the usable area) along the vertical or horizontal axis.
Gland Plate choices for the left hand side of the enclosure are more limited than the right hand side
due to the required ground stud on the interior of the left hand side.
Select Lighting Options
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Select Customer Tagging on the Door
Enter Additional Options
Enter Manufacturing Instructions If No Drawing Available (Optional)
null
Specify Custom Requirements
Whenever possible, please enter custom requirements in the aditional options field of the appropriate catagory.
(i.e.: Custom finish requirements should be specified in the additional options field within the Finish catagory.)
Add Item to Project List Add item to project list Cancel and Back
Item Information
EXE12128SS61         Clear All Selections
Finish Chart
DYS 18 - 23 Business Days
Selection Summary
Express                     DYS                     Custom
 
PDF
Add Item to Project List Add item to project list Cancel and Back