Image for Mild Steel, Double Door Enclosure, MAD from nVent HOFFMAN
+ / - Hover over image to Zoom

 

Need product that’s in stock and ready to ship?
HOD icon HOFFMAN on Demand items are locally available now.

 

Mild Steel, Double Door Enclosure, MAD

Bulletin Number:

  • GW1
  • Material:

  • Steel
  • Industry Standards:

    NEMA Type 12, 13 IP55 IK10
    Select Item modify product

    TO VIEW AN ITEM AND ADD IT TO YOUR PROJECT LIST,
    YOU MUST SELECT AN ITEM.

    The mild steel double door wall mounted enclosure range, MAD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for many different applications.

    Specifications:

  • IP 55 | TYPE 12, 13 | IK 10. For outdoor installation, the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.
  • Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.
  • Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Inner M6 welded studs to mount door profiles MMDP. Two removable mounting profiles on the right hand door and two on the left hand door. Sealing is ensured by an injected one piece polyurethane gasket.
  • Lock: Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. Espagnolette three point locking. Other inserts are available as an accessory.
  • Gland plate: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.
  • Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.
  • Delivery: Enclosure with doors, mounting plate, and two door mounting profiles on the right door. Gland plate(s) with gasket(s), metallic double-bit 3 mm key, and mounting accessories. Earthing facilities.
  • Material:

    Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.

    Finish:

    RAL 7035 structured powder coating.

    Accessories:

  • Mounting Plates
  • Wall Mounting Brackets
  • Door Stop
  • Inner Doors
  • Locks
  • Door Switch
  • Drawings and Technical Publications are available by clicking the "Items" tab. Select your desired Catalog Number and click on the Downloads tab for that particular catalog number.
     
    Catalog Number A in. B in. C in. Mounting Plate Height (mm) Mounting Plate Height (in) Mounting Plate Width (mm) Mounting Plate Width (in) Usable Depth (C) in. Gland Plate Openings
    Catalog Number A in. B in. C in. Mounting Plate Height (mm) Mounting Plate Height (in) Mounting Plate Width (mm) Mounting Plate Width (in) Usable Depth (C) in. Gland Plate Openings
    23.62 31.50 11.81 570 22.44 750 29.53 11.1 2
    31.50 47.24 11.81 770 30.31 1150 45.28 11.1 2
    39.37 39.37 11.81 970 38.19 950 37.40 11.1 2
    47.24 39.37 11.81 1170 46.06 950 37.40 11.1 2
    47.24 47.24 11.81 1170 46.06 1150 45.28 11.1 2
    55.12 39.37 11.81 1370 53.94 950 37.40 11.1 2