Image for Mild Steel, Single Door Enclosure, MAS from nVent HOFFMAN | Asia Pacific
+ / - Hover over image to Zoom

Mild Steel, Single Door Enclosure, MAS

Bulletin Number:

  • GW1
  • Material:

  • Steel
  • Industry Standards:

    UL 508A Listed; Type 4, 12, 13; File No. E92044 cUL Listed per CSA C22.2 No.0, No.0.4, No.14, No.94; Type 12, 13; File No. E92044 NEMA/EEMAC Type 4, 12, 13 CSA, File No. 1442951: Type 4, 12, 13 IEC 62208 IP66 KEMA, GOST, Lloyds, DNV, Maritime, CE,
    Select Item modify product

    TO VIEW AN ITEM AND ADD IT TO YOUR PROJECT LIST,
    YOU MUST SELECT AN ITEM.

    The mild steel single door wall mounted enclosure range, MAS, with a IP 66 protection degree, is available off the shelf in many different sizes. This enclosure range is well suited for many different applications. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure.

    Specifications:

  • Protection: Complies with IP 66 | TYPE 4, 12, 13 | IK 10. For outdoor installation, the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.
  • Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.
  • Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. Inner M6 welded studs to mount door profiles MMDP. Sealing is ensured by an injected one piece polyurethane gasket.
  • Lock: Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. 1000 mm high enclosures and above have espagnolette three point locking. Other inserts are available as an accessory.
  • Gland plate: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.
  • Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.
  • Delivery: Enclosure with door and mounting plate. For height 600 mm and above, two door mounting profiles. Gland plate(s) with gasket(s), plastic double-bit 3 mm key, and mounting accessories. Metallic key, for height 1000 mm and above. Earthing facilities.
  • Material:

    Body: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater. Gland plate: 1.4 mm mild steel. Door: 1.2 mm mild steel / 1.5 mm for enclosures with a height or width of 500 mm or greater / 2 mm for enclosures with a height or width of 800 mm or greater. Mounting plate: 2 mm galvanized steel.

    Notes:

    Mild steel side panels, SPM, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved.

    Accessories:

  • Mounting Plates
  • Wall Mounting Brackets
  • Door Stop
  • Inner Doors
  • Locks
  • Door Switch
  •  
    Catalog Number A mm B mm C mm Mounting Plate Height (mm) Mounting Plate Height (in) Mounting Plate Width (mm) Mounting Plate Width (in) Usable Depth (C) mm Gland Plate Openings
    Catalog Number A mm B mm C mm Mounting Plate Height (mm) Mounting Plate Height (in) Mounting Plate Width (mm) Mounting Plate Width (in) Usable Depth (C) mm Gland Plate Openings
    200 200 155 170 170 150 150 137 1
    250 200 155 220 220 150 150 137 1
    250 250 155 220 220 200 200 137 1
    300 250 155 270 270 200 200 137 1
    300 250 210 270 270 200 200 192 1
    300 300 155 270 270 250 250 137 1
    300 300 210 270 270 250 250 192 1
    350 250 155 320 320 200 200 137 1
    400 300 155 370 370 250 250 137 1
    400 300 210 370 370 250 250 192 1
    400 400 210 370 370 350 350 192 1
    400 500 210 370 370 450 450 192 1
    400 600 210 370 370 550 550 192 1
    500 300 210 470 470 250 250 192 1
    500 400 155 470 470 350 350 137 1
    500 400 210 470 470 350 350 192 1
    500 400 260 470 470 350 350 242 1
    500 400 300 470 470 350 350 282 1
    500 500 210 470 470 450 450 192 1
    500 500 300 470 470 450 450 282 1
    600 400 155 570 570 350 350 137 1
    600 400 210 570 570 350 350 192 1
    600 400 260 570 570 350 350 242 1
    600 400 300 570 570 350 350 282 1
    600 500 155 570 570 450 450 137 1
    600 500 210 570 570 450 450 192 1
    600 500 260 570 570 450 450 242 1
    600 500 300 570 570 450 450 282 1
    600 600 210 570 570 550 550 192 1
    600 600 300 570 570 550 550 282 1
    600 600 400 570 570 550 550 382 1
    600 800 300 570 570 750 750 282 2
    700 500 210 670 670 450 450 192 1
    700 500 260 670 670 450 450 242 1
    800 400 300 770 770 350 350 282 1
    800 600 210 770 770 550 550 192 1
    800 600 260 770 770 550 550 242 1
    800 600 300 770 770 550 550 282 1
    800 600 400 770 770 550 550 382 1
    800 800 210 770 770 750 750 192 2
    800 800 300 770 770 750 750 282 2
    800 800 400 770 770 750 750 382 2
    1000 600 260 970 970 550 550 242 1
    1000 600 300 970 970 550 550 282 1
    1000 800 260 970 970 750 750 242 2
    1000 800 300 970 970 750 750 282 2
    1000 800 400 970 970 750 750 382 2
    1200 600 300 1170 1170 550 550 282 1
    1200 800 300 1170 1170 750 750 282 2
    1200 800 400 1170 1170 750 750 382 2